The Mini Vibrating Fork Level Switch is a compact and easy-to-install device that is suitable for detecting a wide variety of liquids in tanks, containers, and pipelines.
Mini Vibrating Fork Level Switch
The Vibrating Fork Point Level Switch works on the principle of piezo-driven vibrating fork technology. The sensing probe is made up of a rugged construction and contains a piezo crystal and sensing electronics. The sensing probe has a stainless steel housing with an enclosure at its top end that holds the control electronics, and its lower end holds a tuning fork, which vibrates at its mechanical resonance frequency of 400 Hz in the air.
When the fork comes in contact with the liquid, its vibrations get damped, and the change is sensed by the control electronics. This change in the signal is then processed and used to provide a PNP switching output. This output can be used to operate a relay or as input to PLC.
Since the vibration has a self-cleaning property, the maintenance required is minimal. This switch is unaffected by bubbles, foam, or vibration, making it reliable for level detection in a wide variety of liquids in tanks, containers, or pipelines.
Salient Features:
- Compact and lightweight design for easy installation and handling
- Rugged stainless steel housing for durability in harsh environments
- Minimal maintenance is required due to the self-cleaning vibration property
- Unaffected by bubbles, foam, or vibration for reliable operation
- Service-friendly plug connection for easy maintenance and replacement of parts.
Specifications of Mini Vibrating Fork Level Switch
- Terminal: DIN connector
- Mounting: Top or Side Mounted
- Process Connection: ½” BSP (M)
- Housing: SS304
- Fork MOC: SS316
- Insertion Length: Standard – 68 mm
- Resonant frequency: 1.8 KHz
- Supply: 24 VDC ±10%
- Output: PNP (20 mA max, NO Type)
- Power Consumption: 0.5W
- Switching Indication: Red LED; OFF – Normal, ON‐ Alarm
- Max Viscosity: < 10000 CPS
- Ambient Temp: 0 to 55 °C
- Max Temperature: 70 °C
- Max Pressure: 10 kg/cm2 – Standard, High pressure on demand upto 40 kg/cm2
Mini Vibrating Fork Level Switch Applications
- Detection of flow or no flow of liquid in pipelines
- Overfill detection in tanks and containers
- Leak detection in pipes and vessels
- High and low-level alarms in tanks and containers
- Pump dry run protection and pump control
- Suitable for use with oil, water, and similar liquids