Signal Types

  • Signal Types

     Chaitanya updated 11 months ago 1 Member · 1 Post
  • Chaitanya

    July 16, 2020 at 12:42 pm

    The following signal types shall be used (preferable):

    Analogue input/output : 2 wire, 4 – 20 mA.

    Digital input: Potential free contact.

    Digital output: 24 VDC.

    Signals between control systems and other panels shall be powered from the platform control system.

    Position: Proximity switches with the NAMUR interface.

    Pneumatic signals: 0.2 – 1.0 barg.

    Instrument field bus/digital communication may be used if the concept demonstrates economical
    savings and requirements to time response are satisfied.

Log in to reply.

Original Post
0 of 0 posts June 2018